Our Ballantyne Fence Company Shares 4 Tips to Prevent Warping And Sagging

A Ballantyne wood fence installer will make sure that your fence is able to withstand a lot of damage. However, you will have to take special care to ensure that the fence does not warp or sag. There are several things that you can do to prevent this from happening.

Gather The Necessary Supplies

You will need the same supplies that your local wood fence installer used. This includes things such as blunt nails, a hammer, fence boards and a drill. The blunt nails keep the fence from splitting. The fence boards won’t rot as quickly.

Pre-drill All the Holes

Pre-drilling the holes helps prevent the boards from splitting. You will also need to avoid over-driving the nails.

Place the Back Rails Properly

Any wooden fence contractor in Ballantyne will tell you that it is important for you to place the rails properly. The rails should be placed eight inches from the top and eight inches from the bottom. If you have a fence that is higher than eight inches, then you should put a rail in the middle.

Apply a Sealant

A wooden fence contractor in Ballantyne will tell you that it is important to apply a sealant to the fence. This will help slow down the aging process. It will also cause your fence to age more evenly. Additionally, it will prevent your fence from sagging or warping when it dries.

You will have to apply the sealant periodically. The container should have information that will tell you how often you should apply the sealant.

If you are in need of a Ballantyne wood fence installer, then contact us today!